Sensor Si7021 - Humidity and Temperature

Si7021 Sensor for measuring humidity and temperature


 The  Si7021  Sensor  integrates   humidity   and   temperature   sensor   elements,   an   analog-to-digital converter, signal processing, calibration data, and an I2C Interface. The Si7021 offers an accurate, low-power, factory-calibrated digital solution ideal for measuring humidity and temperature

Features

Precision Relative Humidity Sensor ± 3% RH (max), 0–80% RH
High Accuracy Temperature Sensor ±0.4 °C (max), –10 to 85 °C
0 to 100% RH operating range
Up to –40 to +125 °C operating range
Wide operating voltage – (1.9 to 3.6 V)
Low Power Consumption – 150 μA active current

 How to wire
https://learn.sparkfun.com/tutorials/si7021-humidity-and-temperature-sensor-hookup-guide/all

 Library
https://github.com/adafruit/Adafruit_Si7021/blob/master/examples/si7021/si7021.ino#L36

Commentaires

Enregistrer un commentaire

Posts les plus consultés de ce blog

Attiny13A sleep mode

Image
Attiny : arduino's little brother Arduino is a very good card but if you need a very smaller card size or if you don't need alls pins and less memory, Attiny is a good alternative VCC =Voltage is 2.7-5.5 v Notice : Pins output high voltage is 4.3 volts with a Vcc of 5 volts. For 3.3 Vcc, pins o utput  voltage is 2.5 V  So be carefull, this is not 3.3 volts like Arduino How to program Attiny  To program attiny, just use Arduino IDE.  To do this, you will have to connevt Attiny to arduino.  Arduino will now be used as bridge Initial step Upload ArduinoISP sketch on your arduino : Select card Arduino Uno Load sketch Samples > 11.ArduinoISP  Tips : be sure to unplug all wires before to upload the sketch First step First time and only once, you have to write bootloader on Attiny : Choose 'Arduino as ISP' as the programmer prior to burning the Arduino bootloader onto the ATtiny Select card ATtinyXX Verify Board Properties...
Lire la suite